Outdoor Anti-corrosion WPC Hollow Decking

Short Description:

Products ownership:WPC Decking

Item No:LH146H24

Payment:TT/LC

Price:$2.34/M

Product Origin:China

Color:Cedar,Charcoal,Red Brown,Grey,Chocolate or customized

Shipping Port:Shanghai Port

Lead time:10-15 DAYS


Product Detail

Installation Procedure

Product Tags

Name

Outdoor WPC Decking

Item

LS146H24

Section

 a14

Width

146mm

Thickness

24mm

Weight

2690g/m

Density

1350kg/m³

Length

2.9m 3.6m or customized

Application

Park,Garden,Swimming poor

Surface Treatment

Sanding/Embossed

Warranty

Five years

Product Feature

  1. ● WPC decking main material is PE ,wood fibers and additives.Our WPC decking is popular in all the world as we use nature material.
  2. ● Our WPC decking is beautiful and elegant nature wood grain texture,touch with easy installation,thus can meet various requirements of customers.It can be shaved ,nailed,drilled and cut to fit accessories of different specifications,such as landscape,outdoor garden,park,supermarket,etc.
  3. ● Our WPC decking is environmental friendly,fully recyclable and no other hazard chemical,it doesn’t need painting,no glue and low maintenance.
  4. ● Our Decking has good weather ability,it can be suitable from -40℃ to +60℃.Our WPC decking can be used in all the world.Because our boards are weather resistant,anti-slip,few cracks,warp,barefoot friendly.Plus UV additive make our boards UV resistance,fade resistant and durable.Good dimension stability against moisture and temperature.

8668fc8f 4cecbcf1

 

Data sheet

PRODUCT SPECIFICATION

Item

Standard

Requirements

Result

Slip Resistance Dry

EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007             EN 15534-4:2014 Section 4.4

Pendulum value≥36

Longtitudinal direction:Mean 72,Min 70 Horizontal direction:Mean 79,Min 78

Slip Resistance Wet

EN 15534-1:2014 Section6.4.2 CEN/TS 15676:2007            EN 15534-4:2014 Section 4.4

Pendulum value≥36

Longtitudinal direction:Mean 46,Min 44 Horizontal direction:Mean 55,Min 53

Falling mass impact resistance

EN 15534-1:2014 Section7.1.2.1              EN 15534-4:2014 Section 4.5.1

None of the speciments shall a failure with a crack length≥

10mm or a depth of residual indentation≥0.5mm

Max.Crack length(mm):No crack Max.Residual indenation(mm):0.31

Flexural properties

EN15534-1:2014 AnnexA       EN 15534-4:2014 Section 4.5.2

-F’max:Mean≥3300N,Min≥3000N

-Deflection under a load of 500N Mean≤2.0mm,Max≤2.5mm

Bending Strength:27.4 MPa       Modulus of elasiticity:3969 MPa        Maximum load: Mean 3786N,Min 3540N     Deflection at 500N:                Mean:0.86mm,Max:0.99mm

Creep behaviour

EN 15534-1:2014 Section7.4.1   EN 15534-4:2014 Section 4.5.3

Known span in use:            Mean ∆S≤10mm,Max ∆S≤13mm,   Mean ∆Sr≤5mm

Span: 330mm,Mean ∆S 1.65mm,Max ∆S 1.72mm,Mean ∆Sr 1.27mm

Swelling and water absorption

EN 15534-1:2014 Section8.3.1   EN 15534-4:2014 Section 4.5.5

Mean Swelling:≤4% in thickness,≤0.8%

in width,≤0.4% in length Max swelling:≤5% in thickness, ≤1.2% in width,≤0.6% in length Water absorption:            Mean:≤7%,Max:≤9%

Mean Swelling:1.81% in thickness,0.22% in width,0.36% in length             Max Swelling:2.36% in thickness,0.23% in width,0.44% in length          Water absorption:Mean:4.32%,Max:5.06%

Boiling Test

EN 15534-1:2014 Section8.3.3   EN 15534-4:2014 Section 4.5.5

Water absorption in weight:   Mean≤7%,Max≤9%

Water absorption in weight: Mean:3.06%,Max:3.34%

Linear thermal expansion coefficient

EN 15534-1:2014 Section9.2  EN 15534-4:2014 Section 4.5.6 ISO 11359-2:1999

≤50×10⁻⁶ K⁻¹

34.2 x10⁻⁶ K⁻¹

Resistance to indentation

EN 15534-1:2014 Section7.5  EN 15534-4:2014 Section 4.5.7

Brinell hardness: 79 MPa                    Rate of elastic recovery:65%

Heat reversion

EN 15534-1:2014 Section9.3  EN 15534-4:2014 Section 4.5.7 EN 479:2018

Test Temperature:100℃                 Mean: 0.09%


  • Previous:
  • Next:

  • Boards Installation Guide

    With proper installation and care, wood products are guaranteed to provide years of outdoor living pleasure. To achieve a trouble-free installation of wood products:

    -Consult local building codes prior to installation.

    -Familiarize yourself with installation instructions.

    -Ensure you have all the tools and materials needed-as listed in the instruction sheet.

    Storage and Handling

    -Never dump wood materials when unloading.

    -Store on a flat surface and cover with non-translucent material.

    -When carrying wood planks, carry on edge for better support.

    -Refer to installation instructions for additional guidelines on each product.

    Care and Handling Guidelines For Decking

    To minimize scratches, nicks, cuts and grooves, and preserve the beauty of wood decking. Follow these guidelines:

    -Do not slide decks against each other when moving them. When removing them from the unit, lift the decks and set them down.

    -Do not slide tools or drag equipment across the top of the decks during construction.

    -Keep the surface of the decks free from construction waste.Tracking dirt and construction debris across the surface of decks, which contributes to surface scratching.

    Important Information

    -When working with wood products or any building materials, be sure to wear proper clothing and safety equipment.

    -For all wood products, standard wood working tools may be used, as per applicable manufacturer’s instructions.

    -Scrap can be discarded with normal construction debris.

    -wood has excellent slip resistance wet or dry.

    -wood has a built-in hidden fastener system and is easy to install wood clips.

    Fastening Guidelines

    -Use a minimum #8 x 2-1/2” high-quality coated, stainless steel or composite deck screw.

    -Pre-drilling is required in cold weather and when within 1-1/2” of the end of the deck

    -Do not use glue or caulk to fasten wood decks or to seal the joint between two decks and any other surface.This will inhibit the natural expansion and contraction of the planks and will impede the drainage of the deck.

    Proper Ventilation Is Required

    - To reduce moisture build-up from beneath the deck,there must be a minimum

    of 12” high unobstructed continuous airspace along three sides of the deck to allow for cross ventilation.

    This should be located just below the bottom of the deck joist.

    -In some limited applications, including decks built against an inside corner, additional ventilation will be required where the deck meets the building. Failure to provide adequate ventilation may result in failure of the deck surface and will void the warranty.

    Lisen Wood decking Installation Instructions

    You can save construction time and costs by making a design, plan to budget the necessary materials according to the design intent of the programme. You can choose your own material according to your wishes with more varieties wood optional, wood construction, woodworking machinery can be used for cutting, sawing, drilling and so on.

    1. When you install the decking, firstly you should make hardening pretreatment to the ground, and then fix the joist in the hardening ground. We recommend joist pitch for 35-40cm. Joist spacing can also be shorten as requested.image001
    2. Consider a 3cm spacing to the building when installing the decking.image002
    3. The joint kit of wood decking is stainless steel clips. Drilling should be smaller than the diameter of the screw diameter of 3/4 in order to increase the self-tapping screws grip of the nails.image003
    4. Knock the decking gently with the application of rubber hammer during construction to make sure of an equal gap and the beautiful construction surface.image004
    5. The length of sheet metal will be affected because of the larger construction area. We recommend the section the 5mm spacing when the cross-section is needed.image005
    6. 1.You can connect the groove and joist with self-tapping screws if the clips are unavailable for the connection of the joist and decking.image006
    7. Choose complementary board to be edge board according to the size of the joist and decking after completing the construction.image007

    Installation Figs of plastic clips

    1. When you install the decking, firstly you should make hardening pretreatment to the ground, and then fix the joist in the hardening ground. We recommend joist pitch for the 35-40 cm. Joist spacing can also be shorten as requested.image008
    2. Consider the 3cm spacing to the building when installing the decking.image009
    3. Another joint kit of wood decking is plastic steel clips. Drilling should be smaller than the diameter of the screw diameter of 3/4 in order to increase the self-tapping screws grip of the nails.
      image010 image011
    4. Knock the decking gently with the application of rubber hammer during construction to make sure of an equal gap and the beautiful construction surface. image012 image013
    5. The length of sheet metal will be affected because of the larger construction area. We recommend the section the 5mm spacing when the cross-section is needed.image014
    6. You can connect the groove and joist with self-tapping screws if the clips are unavailable to the connection of the joist and decking.image015
    7. Choose complementary board to be edge board according to the size of the joist and decking after completing the construction.image016

    Install the solid decking

    1. When you install the decking, firstly you should make hardening pretreatment to the ground, and then fix the joist in the hardening ground. We recommend joist pitch for the 35-40cm. Joist spacing can also be shorten as requested.image017
    2. Consider the 3cm spacing to the building when installing the solid decking Install the solid decking with visible nails and place the nail 2cm to the edge.image018
    3. Repeat the process.image019
    4. Choose complementary board to be edge board according to the size of the joist and decking after completing the construction.image020
  • Write your message here and send it to us