3D embossed fireproof wood plastic composite WPC wall cladding
|
Name |
3D WPC Wall Cladding |
|
Item |
LS157H16 |
|
Section |
 |
|
Width |
157mm |
|
Thickness |
16mm |
|
Weight |
1880g/m |
|
Density |
1350kg/m³ |
|
Length |
2.2m,2.9m,3.6mor customized |
|
Application |
Villa,cottage house |
|
Surface Treatment |
3D embossed |
|
Warranty |
Five years |
Product Feature
1:New technology 3D embossing WPC outdoor decoration cladding, decorative enhancement. 3D embossing technology is a superficial carving technique. Each cladding is the same as a sculpture, and the artistic atmosphere and visual degree have been greatly improved. Classical 3D embossing is a great improvement in seen wood-plastic cladding, which cannot only be re-engraved with the bands but also support the traces of the start barking.
2:Traditional wpc composite cladding are easy to lose grain on surface,super embossed cladding perform better than any common composite wood,it is more natural and attractive,better fading and scratching resistant.
3:Lihua’s super embossed WPC cladding have all the advantages of traditional composite wall panel ,it is still kept: waterproof, anti-UV, weather resistant, anti-corrosion,insect prevention, low maintenance, long service life etc...And the deep embossed boards look and feel more like the natural wood due to the 3D embossing treatment of the surface.
|
Data sheet |
|||
|
PRODUCT SPECIFICATION |
|||
|
Item |
Standard |
Requirements |
Result |
| Falling mass impact resistance | EN 15534-1:2014 Section7.1.2.1 EN 15534-5:2014 Section 4.5.1 |
None of the speciments shall a failure | None crack of the test specimens |
| Flexural properties | EN15534-1:2014 AnnexA EN 15534-5:2014 Section 4.5.2 |
Deflection under a load of 500N ≤5.0mmBending strengthMaximum load at fracture | Front Face:Maximum load: Mean 1906NDeflection at 250N:Mean 0.64mmBack Face: Maximum load: Mean 1216N Deflection at 250N:0.76mm |
| Swelling and water absorption | EN 15534-1:2014 Section8.3.1 EN 15534-5:2014 Section 4.5.4 |
Mean Swelling:≤10% in thickness,≤1.5% in width,≤0.6% in length Max swelling:≤12% in thickness, ≤2% in width,≤1.2% in length Water absorption: Mean:≤8%,Max:≤10% |
Mean Swelling:2.25% in thickness, 0.38% in width,0.15% in length Max Swelling:2.31% in thickness, 0.4% in width,0.22% in length Water absorption:Mean:5.46%,Max:5.65% |
| Linear thermal expansion coefficient | EN 15534-1:2014 Section9.2 EN 15534-5:2014 Section 4.5.5 |
≤50×10⁻⁶ K⁻¹ | Mean:46.8 x10⁻⁶ K⁻¹ |
| Pull through resistance | EN 15534-1:2014 Section7.7 EN 15534-5:2014 Section 4.5.6 |
Force at failure:479N,Mean value:479N, Failure mode:479N There was crack on the test specimen |
|
| Heat reversion | EN 15534-1:2014 Section9.3 EN 479:1999 EN 15534-5:2014 Section 4.5.6 |
Test Temperature:100℃Mean: 0.09% | |
Q1:Can your WPC products be with customer’s logo ?
A:Yes,if customer give us their logo,we can put the logo on the packages of the products or print it on the products which are special!
Q2:How long do you make a new mould for new products?
A:In general,we need 15-21 days to make a new mould,if there are some difference,5-7 days more need to do minor modifications.
Q3:Do customer need to pay the fee for new mould?How much is it?Will we return back this fee?How long will?
A:If customer need to make new mould,yes they need to pay the fee for the mould first,it will be $2300-$2800.And we will return back this fee when the customer place three orders for 20GP container.
Q4:What is the component of your WPC products?What are they?
A:Our WPC products component are 30%HDPE+60%Wood Fibers+10%Chemical Additives.
Q5:How long do you update your products?
A:We will update our products every month.
Q6:What is the design principle of your product appearance? What are the advantages?
A:Our products are design on the practicability of life,like the anti-slip,weather resistant,anti-fading,etc.
Q7:What are the differences of your products among peers?
A:Our WPC products are using better and newer material,so the quality is better and the advantage of technology,our price are very good.
Q8:Who are your R & D personnel? What are the qualifications?
A:We have a R&D team,all of them have full experience in average,they have worked in this area for more than ten years!
Q9:What is your product R & D idea?
A:Our R & D idea is environmental friendly ,low maintenance,long life using and high quality.
Q10:What are the technical specifications of your products? If so, what are the specific ones?
A:Our technical specifications are exact size,mechanical property,Anti-slip performance,Waterproof performance,Weather ability,etc.
